Figure 6-17
AMM with project dialog (OFFLINE)
6.2.5
Closing the project
Operating sequence
1. You can close the open project with "File > Close project" in the main window menu.
2. The project dialog disappears, and "No project active" is displayed in the title bar of AMM.
As a consequence, a project is not automatically opened the next time AMM starts.
Note
Show/hide project window
If you want to hide the project window without closing the project, deactivate the checkbox in
the menu "View > Project window". You can show the project window again in the same way.
SINUMERIK Integrate Access MyMachine /P2P (PC)
Operating Manual, 11/2016, A5E39356962B AA
Operator control (software)
6.2 Project
99