Prerequisites; Configuring For Timing Analysis - HP 64700 series User Manual

Prerequisites

Configuring for
Timing Analysis
5-2 Using the External Timing Analyzer
Before you can use the external timing analyzer, you must have already
completed the following tasks:
You must be using the version of the PC Interface that gives
you access to the external timing analyzer.
The external analyzer probe must be assembled and connected
to signals of interest as shown in the "Using the External
Analyzer" chapter.
To configure your emulator's external analyzer as a timing analyzer,
select:
Analysis, System
Now, use the Tab key to select "external timing analyzer" and press
Enter.
When the external analyzer is configured as a timing analyzer, the
"Analysis Trace Modify External" command gives you a special
timing analyzer trace specification screen (see figure 5-1) and the
"Analysis Display External" command gives you a timing waveform
display.