Informational Event Codes - IBM Storwize V7000 Troubleshooting And Maintenance Manual

Table 18. Informational event codes (continued)
Event code
981026
981101
981102
981103
981104
981105
981106
982003
982004
982007
982009
982010
983001
983002
983003
984001
984002
984003
984004
984501
984502
984503
984504
984505
985001
985002
985003
986001
986002
986010
986011
986020
986030
986031
Notification type Description
I Drive FPGA download started
I SAS discovery occurred; no configuration changes are required.
I SAS discovery occurred; configuration changes are required.
I SAS discovery occurred; configuration changes are complete.
W The LUN capacity equals or exceeds the maximum capacity. Only
the first 1 PB of disk will be accessed.
I The drive format has started.
I The drive recovery was started.
W Insufficient virtual extents.
W The migration suspended because of insufficient virtual extents or
too many media errors on the source managed disk.
W Migration has stopped.
I Migration is complete.
W Copied disk I/O medium error.
I The FlashCopy operation is prepared.
I The FlashCopy operation is complete.
W The FlashCopy operation has stopped.
W First customer data being pinned in a virtual disk working set.
I All customer data in a virtual disk working set is now unpinned.
W The volume working set cache mode is in the process of changing to
synchronous destage because the volume working set has too much
pinned data.
I Volume working set cache mode updated to allow asynchronous
destage because enough customer data has been unpinned for the
volume working set.
I The firmware level of an enclosure component is being updated.
I The firmware level updated has completed.
I The battery conditioning completed.
I The battery conditioning started.
I The statesave information for the enclosure was collected.
I The Metro Mirror or Global Mirror background copy is complete.
I The Metro Mirror or Global Mirror is ready to restart.
W Unable to find path to disk in the remote cluster within the timeout
period.
W The thin-provisioned volume copy data in a node is pinned.
I All thin-provisioned volume copy data in a node is unpinned.
I The thin-provisioned volume copy import has failed and the new
volume is offline; either upgrade the Storwize V7000 software to the
required version or delete the volume.
I The thin-provisioned volume copy import is successful.
W A thin-provisioned volume copy space warning has occurred.
I A thin-provisioned volume copy repair has started.
I A thin-provisioned volume copy repair is successful.
Chapter 7. Event reporting
67