Storwize V7000 Replaceable Units; Removing A Rail Assembly From A Rack Cabinet; Replaceable Units - IBM Storwize V7000 Troubleshooting And Maintenance Manual

Hide thumbs Also See for Storwize V7000:

Table of Contents

Figure 36. Removing a rail assembly from a rack cabinet

4. Working from the front of the rack cabinet, remove the clamping screw from the rail assembly on

both sides of the rack cabinet.

5. From one side of the rack cabinet, grip the rail and slide the rail pieces together to shorten the rail.

6. Remove the rail location pins 2 .

7. From the other side the rack cabinet, grip the rail and slide the rail pieces together to shorten the

rail.

8. Remove the rail location pins 2 .

9. Starting from the location of the previous rail assembly, align the bottom of the rail with the bottom

of the two rack units. Insert the rail location pins through the holes in the rack cabinet.

10. Insert a clamping screw into the upper mounting hole between the rail location pins.

11. Tighten the screw to secure the rail to the rack.

12. Working from the rear of the rack cabinet, extend the rail that you secured to the front to align the

bottom of the rail with the bottom of the two rack units.

Note: Ensure that the rail is level between the front and the back.

13. Insert the rail location pins through the holes in the rack cabinet.

14. Insert a clamping screw into the upper mounting hole between the rail location pins.

15. Tighten the screw to secure the rail to the rack from the back side.

16. Repeat the steps to secure the opposite rail to the rack cabinet.