Error Codes; Event Ids And Codes - IBM Storwize V7000 Troubleshooting And Maintenance Manual

Table 18. Informational event codes (continued)
Event code
986032
986033
986201
986203
986204
986205
986206
986207
986208
986209
987102
987103
987104
987301
987400
988100
988300
988301
988302
988304
988305
989001

Error codes

Error codes describe a service procedure that must be followed. Each event ID that requires service has
an associated error code.
Table 19 lists the event IDs and corresponding error codes.
Table 19. Event IDs and codes
Notification
Event ID type
009020 E
009040 E
68
Storwize V7000 Version 6.1.0: Troubleshooting, Recovery, and Maintenance Guide
Notification type Description
I A thin-provisioned volume copy validation is started.
I A thin-provisioned volume copy validation is successful.
I A medium error has been repaired for the mirrored copy.
W A mirror copy repair, using the validate option cannot complete.
I A mirror disk repair is complete and no differences are found.
I A mirror disk repair is complete and the differences are resolved.
W A mirror disk repair is complete and the differences are marked as
medium errors.
I The mirror disk repair has been started.
W A mirror copy repair, using the set medium error option, cannot
complete.
W A mirror copy repair, using the resync option, cannot complete.
W Node coldstarted.
W A node power-off has been requested from the power switch.
I Additional fibre-channel ports were connected.
W The connection to a configured remote cluster has been lost.
W The node unexpectedly lost power but has now been restored to the
cluster.
W An overnight maintenance procedure has failed to complete. Resolve
any hardware and configuration problems that you are experiencing
on the Storwize V7000 cluster. If the problem persists, contact your
IBM service representative for assistance.
W An array MDisk is offline because it has too many missing members.
I The rebuild for an array MDisk was started.
I The rebuild for an array MDisk has finished.
I A RAID array has started exchanging an array member.
I A RAID array has completed exchanging an array member.
W A managed disk group space warning has occurred.
Condition
An automatic cluster recovery has started. All configuration commands
are blocked.
The error event log is full.
Error
code
1001
1002