Error Event Ids And Error Codes - IBM Storwize V7000 Maintenance Manual

Error event IDs and error codes

Error codes describe a service procedure that must be followed. Each event ID that
requires service has an associated error code.
Table 26 lists the event IDs and corresponding error codes.
120
Storwize V7000: Troubleshooting, Recovery, and Maintenance Guide
Table 25. Informational events (continued)
Notification
Event ID type
987400 W
988100 W
988300 W
988301 I
988302 I
988304 I
988305 I
988306 I
989001 W
Table 26. Error event IDs and error codes
Event Notification
ID type Condition
009020 E An automatic system recovery has started. All
configuration commands are blocked.
009040 E The error event log is full.
009052 W The following causes are possible:
v The node is missing.
v The node is no longer a functional member of the
009053 E A node has been missing for 30 minutes.
009100 W The software install process has failed.
009101 W The software upgrade package delivery has failed.
009150 W Unable to connect to the SMTP (email) server
009151 W Unable to send mail through the SMTP (email) server
009170 W The Metro Mirror or Global Mirror feature capacity is
not set.
009171 W The FlashCopy feature capacity is not set.
009172 W The Virtualization feature has exceeded the amount that
is licensed.
Description
The node unexpectedly lost power but has now been
restored to the cluster (system).
An overnight maintenance procedure has failed to
complete. Resolve any hardware and configuration
problems that you are experiencing on the cluster
(system). If the problem persists, contact your IBM
service representative for assistance.
An array MDisk is offline because it has too many
missing members.
The rebuild for an array MDisk was started.
The rebuild for an array MDisk has finished.
A RAID array has started exchanging an array
member.
A RAID array has completed exchanging an array
member.
A RAID array needs resynchronization.
A managed disk group space warning has occurred.
system.
Error
code
1001
1002
1196
1195
2010
2010
2600
2601
3030
3031
3032