Tech-Support Commands
show tech-support ppp
To automatically run show commands that display information specific to Point to Point Protocol (PPP)
debugging, use the show tech-support ppp command in EXEC mode.
show tech-support ppp [file send-to] [background] [compressed| uncompressed] [interface type instance]
[location node-id| all] [rack]
Syntax Description
file
send-to
background
compressed
uncompressed
interface
type
OL-28456-02
Specifies that the command output is saved to a specified file.
Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• disk0: filename
• disk0a: filename
• disk1: filename
• disk1a: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• harddiskb: filename
• nvram: filename
• rcp: filename
• tftp: filename
(Optional) Specifies that the command runs in the background.
(Optional) Displays compressed command output.
(Optional) Displays the command output with no compression.
Collects information about a specific interface.
Interface type. For more information, use the question mark (?) online help function.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
show tech-support ppp
251