Clear Counters Wanphy - Cisco ASR 9000 Series Command Reference Manual

clear counters wanphy

clear counters wanphy
To clear the alarms counters for a specific 10-Gigabit Ethernet WAN PHY interface, use the clear counters
wanphy command in EXEC mode.
clear counters wanphy interface-id stats
Syntax Description
interface-id
stats
Command Default
No default behavior or values
Command Modes
EXEC mode
Command History
Release
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
interface
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
1098
10-Gigabit Ethernet WAN PHY Controller Commandson the Cisco ASR 9000 Series Router
Physical interface instance. Naming notation is rack/slot/module/port and a slash between
values is required as part of the notation.
• rack: Chassis number of the rack.
• slot: Physical slot number of the line card.
• module: Module number. A physical layer interface module (PLIM) is always 0.
Shared port adapters (SPAs) are referenced by their subslot number.
• port: Physical port number of the interface.
For more information about the syntax for the router, use the question mark (?) online help
function.
Clears alarm counters for the specified 10-Gigabit Ethernet WAN interface.
Modification
This command was introduced.
Operations
read, write, execute