Verifying Important Parameters; Viewing The Required Torch Parts - Lincoln Electric spirit II 150 Technical Manual

Section 4: Operation with Automatic Gas Console

Verifying Important Parameters

Prior to making a cut or mark with the system, the torch height control and the X/Y
controller must be configured properly. To view the recommended cutting data, press
the Parameters navigation button.
See RS422 Parameter Control for more information on how to adjust these settings.

Viewing the Required Torch Parts

Once the material and thickness have been selected, the torch parts are determined
automatically. To see which consumables need to be built up in the torch head, press
the View Torch Parts button on the Material screen. Press Cancel to return to the
Material screen.
BK277154
BK279483
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
BK277286 BK277151 BK279384
BK279410 BK279060
4-4
Spirit II User's Manual