Revision History - Lincoln Electric spirit II 150 Technical Manual

Prologue

Revision History

Rev ECO#
A -
B LAD0202
C LAD0217
LAD0228
D
LAD0223
E LAD0260
F LAD0264
LAD0276
LAD0199
G
LAD0284
LAD0288
H LAD0313
LAD0234
LAD0317
I
LAD0323
LAD0330
Trademark Notice
Spirit is a registered trademark of Lincoln Global, Inc.
FASTON is a trademark of the TE Connectivity Ltd family of companies.
All other trademarks are property of their respective owners.
This documentation may not be copied, photocopied, reproduced, translated, or
reduced to any electronic medium or machine-readable format without explicit
written permission from Lincoln Electric.
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
Author Date
CAD 02/04/2013
CAD 06/07/2013
CAD 08/06/2013
CAD 08/28/2013
CAD 03/18/2014
CAD 03/31/2014
CAD 09/18/2014
CAD 01/30/2015
CAD 09/01/2015
Description of Change
Initial Release.
Added 100A/150A silver electrodes, replaced RHF with ISC,
added argon marking, corrected system interconnect
diagrams, changed rated inlet gas pressure to 115 psi,
added 100 psi minimum to inlet gas pressure.
Deionization filter cartridge (500510) replaced sediment filter
(300152). Parts list updated.
Corrected Plasma Console icon description from hardware
error to warning message.
Expanded notes on System Interconnection diagrams to
clarify cabling requirements for various configurations.
Corrected contact ratings on page 3-20.
Added pinouts to CII, FII, JII cables in Parts List.
Corrected part numbers for coolant/power leads and work
ground in Parts List.
Inductor (707150) replaced by (707155). 10" fan (500516)
replaced by (284031). Added argon purity specification.
Added notes about torch handle vent hole. Updated
Chopper Test Procedure. Clarified RS422 Parameter
Control description.
Added "BK" prefix to all part numbers. Added PCB Outline
Dwgs and corrected electrode tool in Part List. Corrected
Remote On/Off info in Installation section.
Clarified fuse/breaker types in Installation section, updated
Parts List with second o-ring in Q-D Head on cathode
adapter, corrected several parts numbers in the Parts List,
updated interior drawings of ISC console throughout, added
hot parts warning.
Changed ISC to ASC. Updated branding throughout.
Combined RHF and CleanStrike
Corrected gas flow rates on page 2-6.
Updated part numbers for terminal blocks. Updated AGC
and manifold part numbers. Updated coolant pump part
number. Updated warranty. Added pierce capability for 1.25"
(32mm) MS at 150A.
ii
Spirit II User's Manual
™
Technology throughout.