Checking System Status - Lincoln Electric spirit II 150 Technical Manual

Automatic plasma cutting system with fineline high definition technology
Hide thumbs Also See for spirit II 150:
Table of Contents

Advertisement

Spirit II User's Manual

Checking System Status

To view the system status indicators, press the Status navigation button.
Each indicator will be either Green or Red.
ASC Door
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
Section 4: Operation with Automatic Gas Console
DC Power Indicator
Green when the main contactor has
been energized and D.C. current is
flowing through the torch. Red when no
D.C. current is flowing.
3 Phase Power Indicator
Green when 3 phase power is
satisfactory. Red when there is a
problem with main 3 phase power.
Gas Console Indicator
Green when the automatic gas console
is operational. Red when there is a
problem with the gas system. Check
the message screen for errors.
ASC Door Indicator
Green when the arc starting console
door is closed. Red when the arc
starting console door is open.
Coolant Temperature Indicator
Green when the torch coolant
temperature is satisfactory. Red when
the coolant temperature is too hot. If
this indicator turns Red, leave the
system on until it turns Green again.
Coolant Level Indicator
Green when the coolant level inside the
reservoir is satisfactory. Red when
coolant must be added.
Coolant Flow Indicator
Green when the coolant flow through
the system is satisfactory. Red when
the coolant flow is restricted.
4-5

Advertisement

Table of Contents
loading

Table of Contents