Configuring The Connection - Honeywell HRHT4041 Remote User Manual

Configuring the Connection

Click Connection in the Network configuration interface to open the Connection configuration
interface.
Table 3-5 TCP/IP Configurations
Configuration
IP Address
Preferred DNS
Alternate DNS
Note For the IPv6 version IP address, the Preferred DNS and Alternate DNS shall be no
more the 128 digits. They also can not be left blank.
LAN Download
Figure 3-11 Connection Configuration Interface
Table 3-6 Network Connection Configurations
Configuration Description
Max Connection The maximum Web connection for the same DVR. The value ranges
from 1 to 120. The default is 120.
TCP Port The default is 37777. You can enter the actual port number, if
necessary.
UDP Port The default is 37778. You can enter the actual port number, if
necessary.
HTTP Port The default is 80. You can enter the actual port number, if necessary.
RTSP Port The default is 554.
Description
1. Use your PC's keyboard to enter the IP address.
2. Set the Subnet mask and Default gateway.
Note The IP address, subnet mask, and default gateway are
not configurable when the Mode is set to DHCP.
Enter the DNS IP address.
Enter an alternate DNS IP address.
Enable this function so that the system can process the
downloaded data first. The download speed is 1.5X or 2.0X of
the normal speed.
Configuration | 45
800-22740 - A - 02-2017