Honeywell HRHT4041 Remote User Manual page 50

50 | Performance Series HQA Digital Video Recorder Remote User Guide
Operation
configure the proper server address, port value, and domain name.
www.honeywell.com/security
Figure 3-16 DDNS Configuration Interface
Before you can use Honeywell DDNS, you need to enable this service and
Table 3-9 DDNS Configurations
Parameter Description
DDNS Type You can select the DDNS protocol from the drop-down list, and
then enable the DDNS function. Select the Honeywell DDNS
server (which is free) to enable the DDNS function.
Host IP This is the DDNS server IP address. Under Honeywell DDNS, the
default server address is www.henDVR-ddns.com.
Domain Mode Select Default Domain or Custom Domain Name. The default is
Default Domain. If you select Custom Domain Name, then you
must enter a domain name.
Domain Name The default domain name is
You can define the prefix.
Username The user name you enter to log in the server (Optional).
Note Do not register frequently. You need to wait at least 60 seconds between
registration requests. Too many registration requests might leave your server
vulnerable to attacks.
Note The system DDNS server might take back a domain name that is idle for one
year. If you configure your email address in the DDNS configuration, you will get
a notification email before the domain name is taken back.
MAC address.henDVR-ddns.com.