Information - Honeywell HRHT4041 Remote User Manual

1.
2.
To return the DVR system to default settings, click Reset.

Information

Click Info on the toolbar in Preview mode to open the Info window.
Figure 2-2 Image Settings
Click to select one channel's video. The currently selected channel border turns Green to
indicate it is selected.
Click the Image adjustment buttons in Section 8. See
18.
Table 2-3
Setting Description
Adjusts the monitor's video brightness.
Adjusts the monitor's video contrast.
Adjusts the monitor's video hue.
Adjusts the monitor's video saturation.
Restores the system to its defaults value.
Reset image equilibrium.
Note All of these configurations apply to the Web Viewer only.
LAN Mode Main Window on page
Image Settings
Live Viewing | 29
800-22740 - A - 02-2017