Honeywell HRHT4041 Remote User Manual page 55

Figure 3-21 FTP Configuration Interface
Table 3-11 FTP Configurations
Setting Description
Server IP Enter the IP address for the server.
Port Enter the Port number for the server.
User Name Enter the user name for logging into the server.
Password Enter the password for logging into the server.
Anonymous Click to enable/disable anonymously logging into the server.
Remote Directory When the remote directory is null, the DVR automatically creates folders
according to the IP, time, and channel.
File Length Here you determine the size of the upload file. If the setup file size is
larger than the actual file, then the system uploads the entire file. If the
setup file size is smaller than the actual file, then the system uploads only
the set file size. If you enter 0 here, then the system uploads all
corresponding files.
Image Upload This is the interval that the CVR waits through before uploading an image
Interval to the FTP site. Select from 0 to 3600 seconds. 0 means that there is no
interval.
Channel Select a channel.
Weekday Select a weekday.
Time Periods You can configure up to two time periods per channel.
Click FTP Test to test the FTP connection. A popup window shows the status of the connection.
Configuration | 55
800-22740 - A - 02-2017