Honeywell HRHT4041 Remote User Manual page 73

Table 3-15
Configuration
Period
Record Channel
Delay
Remote Alarm Configurations
Description
Define a period during which motion detection is active.
1. Click Set. The Set configuration interface appears.
2. Click Set after a day of the week to set time periods for that
day.
3. Enter a time range (Period) for when the event detection
area is active, then click the check box to activate that
Period.
Note You can configure up to 6 periods within one day.
4. Click Save.
To Copy Time Periods to Other Days
1. Click Set to select a day with configured time periods.
2. Click the boxes besides the days to select the days to
which to copy the periods.
3. Click Save.
The system automatically starts recording selected channels
when a motion detection alarm occurs.
Note You need to set the alarm recording period.

Go to Storage Schedule to configure the current channel
for scheduled recording. See
page 83.
The system can delay recording for a specified amount of time
after an alarm has ended. Select from 10s to 300s.
Configuration | 73
Configuring Local Storage on
800-22740 - A - 02-2017