Ricoh Pro C5200s User Manual page 36

2. Getting Started
2. Remove the stack of paper from the finisher shift tray.
3. Attach the Z-fold support tray 3
*3 The back of the Z-fold support tray 3 is embossed with "3".
Z-fold support tray 3
Attach the Z-fold support tray 3 by inserting the two protrusions on its underside into the
holes on the finisher shift tray.
If the finisher is installed with the cooling fan unit, proceed to Step 4.
4. Press the [Suspend / Resume] key.
Multi-folding unit
1. Open the front cover of the multi-folding unit and take out the Z-fold support tray for multi-
folding unit (located at the bottom of the multi-folding unit).
2. Attach the Z-fold support tray for multi-folding unit in the slope of the folding unit tray so that it
is flush against the end fence.
34
*3
.
CNM015
CVF025