Ricoh Pro C5200s User Manual page 166

8. Adding Paper and Toner
Registering a new custom paper with the Media Identification Unit
1. Press the [Paper Setting] key.
2. Press [Edit Custom Paper].
3. Press [New Program].
4. Press [Scan Value to Program with Media Identification Unit].
5. Insert paper into the Media Identification Unit, and then remove it.
Hold the edges of the paper with both hands when inserting the paper.
Keep the paper flat as you pull it out.
6. Change the settings for custom paper (such as paper's name, size, and type), as
necessary.
If you change the [Paper Weight], [Paper Type], [Coated Paper Type], [Paper Color], [Prepunched
or Not], or [Textured or Not] and press [OK], a message appears to notify you that the [Advanced
Settings] will be initialized. To apply the changes for those settings, select [Change]. To cancel the
changes, select [Do not Change].
7. Press [OK].
8. Press [Exit].
9. Press the [Paper Setting] key.
164
DRC135
DFZ009