Ricoh Pro C5200s User Manual page 168

8. Adding Paper and Toner
6. Change the settings.
If you change the [Paper Weight], [Paper Type], [Coated Paper Type], [Paper Color], [Prepunched
or Not], or [Textured or Not] and press [OK], a message appears to notify you that the [Advanced
Settings] will be initialized. To apply the changes for those settings, select [Change]. To cancel the
changes, select [Do not Change].
7. Press [OK].
8. Press [Overwrite].
Press [Save] to register the paper settings as another custom paper.
9. Press [Yes].
10. Press [Exit].
11. Press the [Paper Setting] key.
• For details about custom paper settings, see "Custom Paper Settings", Paper Settings.
• You cannot modify a custom paper that is assigned to a paper tray. To modify it, cancel the
assignment.
• For details about [Advanced Settings], contact your machine administrator.
• Sheets of custom paper are assigned with a sequential number from 0001. You can change the
number on the [Change Custom Paper Settings] screen.
• Press [Scan and Update Value of Media Identification Base Data] to register the information
scanned by the Media Identification Unit. Also press this button to increase identification accuracy
to search for custom paper or register information from custom paper that was registered without
using the master library.
166
DFZ009