Ricoh Pro C5200s User Manual page 31

5. Extension unit
Attached to the LCT and holds 2,500 sheets of B4 JIS , A4 , 8
6. Large capacity tray (LCT)
Holds up to 4,400 sheets of paper.
7. A3/11 × 17 tray unit
You can load paper sizes up to A3
you install the A3/11 × 17 tray unit on your machine, you cannot use it as a tandem tray.
8. Copy connector
Allows you to use the connect copy function.
9. Decurler unit
Flattens curls from sheets to prevent paper jams.
10. Buffer pass unit
Cools copies or prints.
11. Twin interposer
Inserts cover or slip sheets into copied or printed paper.
12. Multi-folding unit
The Multi-folding unit can apply the following folds: Half Fold, Letter Fold-out, Letter Fold-in, Double Parallel
Fold, Gate Fold, and Z-fold.
13. Interposer
Inserts cover or slip sheets into copied or printed paper.
14. Booklet Finisher SR5080
Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of
paper in the center and fold them into booklets. Consists of the following paper trays:
• Finisher upper tray
• Finisher shift tray
• Finisher booklet tray
Prints can be punched if the optional punch unit is installed on the finisher.
15. Finisher SR5070
Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
• Finisher upper tray
• Finisher shift tray
Prints can be punched if the optional punch unit is installed on the finisher.
16. SR5000 series output tray for banner sheet
Allows you to output paper that has a horizontal length of 487.8 mm (19.21 inches) or longer on Finisher
SR5070 or Booklet Finisher SR5080.
17. Booklet Finisher SR4130
Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of
paper in the center and fold them into booklets. Consists of the following paper trays:
1
or 11 × 17 in Tray 1 using this unit. Replace this tray with Tray 1. If
Guide to Functions of the Machine's Options
1
/ × 14 , or 8 / × 11 paper.
2 2
29