Ricoh Pro C5200s User Manual page 236

10. Information for This Machine
• The default period the machine waits before entering Low Power mode is 15 minutes. This
default time can be changed.
Sleep mode
• If this machine remains idle for a specified period or when the [Energy Saver] key is pressed, it
enters Sleep mode to further reduce its electrical consumption.
• The default delay time the machine waits before entering Sleep mode is 60 minutes. This
default time can be changed.
• The machine can print jobs from computers while in Sleep mode.
Specification
Reduced electrical consumption in Low
Power mode
Time of switch into Low Power mode
Time of switch out from Low Power
*1*2
mode
Reduced electrical consumption in Sleep
*1
mode
Time of switch into Sleep mode
Time of switch out from Sleep mode
Duplex Function
*1 The time it takes to switch out from energy saving functions and electrical consumption may differ
depending on the conditions and environment of the machine.
*2 Image adjustment may take around 100 seconds.
*3 Achieves ENERGY STAR energy savings; product fully qualifies when packaged with (or used with) a
duplex tray and the duplex function is enabled as an option.
• Specifications can vary depending on which options are installed on the machine.
• For details about how to change the default interval, see "Timer Settings", Connecting the
Machine/ System Settings.
• The machine enters sleep mode directly in the following situations:
• Low Power Mode Timer and Sleep Mode Timer are set to the same time
• Sleep Mode Timer is set to a shorter time than Low Power Mode Timer
234
*1
*1
*3
Type 1
154 W
15 minutes
31.7 seconds
0.75 W
60 minutes
119 seconds
Standard
Type 2
152 W
15 minutes
32.8 seconds
0.75 W
60 minutes
119 seconds
Standard