Ricoh Pro C5200s User Manual page 33

Removing prints from Finisher SR4120 or Booklet Finisher SR4130 during printing
This section describes how to suspend a large copy or print job when using Finisher SR4120 or Booklet
Finisher SR4130 with the cooling fan unit installed.
Depending on the image you are copying or printing, prints might not stack properly. If this happens,
suspend the job, remove the prints and then restart the job.
1. Press the [Suspend / Resume] key near the paper outlet port.
1 1
1. [Suspend / Resume] key
2. Remove the stack of paper from the finisher shift tray.
3. Press the [Suspend / Resume] key to restart the print.
• You can suspend copying or printing only when the finisher shift tray is selected as the output tray.
Removing prints from Finisher SR5070 or Booklet Finisher SR5080 during printing
This section describes how to suspend a print job when using the finisher.
Depending on the image you are printing, prints might not stack properly. If this happens, suspend the
job, remove the prints and then restart the job.
Guide to Functions of the Machine's Options
DRB286
DRB287
31