Denon DVD-9000 Operating Lnstructions page 32

@ When "DIGITAL OUT" is selected:
d in Dolby Digital or
DTS, bitstream signals are output from the
digital audio output terminals. When playing
DVDs recorded in linear PCM or packed PCM,
linear PCM signals are output.
Select "NORMAL" when making digital
connections to an AV amplifier with built-in Dolby
I and DTS decoder.
When playing Dolby Digital/DTS bitstream
signals or DVDs recorded in linear PCM or
packed PCM, the signals are converted into 48
kHz/l6-bit PCM (Z-channel) signals and output
from the digital outputs. When playing DVDs
recorded in PCM, linear PCM signals are output.
n "LPCM (44.1 kHz/ 48 kHz)" is selected:
(~ac~o~~ ~e~aMl~)
n playing linear PCM or packed PCM DVDs
that are not copyright-protected, for Z-channel
PCM audio signals up to 96 kHz, linear PCM
signals are output as such without being
converted from the digital outputs. (176.2 kHz
and 19'2 kHz signals are converted to 88.2 kHz
and 96 kHz, respectively.)
PCM signals of 48 kHz/lG bits and lower are
output, regardless of whether they are
copyright-protected or not.
For DVDs containing multi-channel PCM signals,
the digital signals are down-mixed for output into
two channels, front left and right. (Only the front
left and right channels are output for sources for
which down-mixing is prohibited.)
When playing copyright-protected linear PCM or
packed PCM DVDs, in consideration of
copyrights, no digital signals are output for
sources exceeding 48 kHz/lG bits. When playing
such sources, either set to "ON" or make analog
connections. (See page 14.)
0
Linear PCM and packed PCM signals are
converted to 44.1 kHz or 48 kHz and output. (The
PCM digital audio output signals are converted
to 48 kHz or less in consideration of copyrights.)
When making digital connections to an AV
amplifier that is not compatible with 96 kHz188.2
kHz signals, set to "ON".
When playing DVDs recorded in linear PCM or
packed PCM and the unit is set to output digital
and analog audio signals simultaneously, the
analog audio output signals are also converted to
48 kHz or below, so we recommend setting to
"OFF" and also making analog connections.
(See page 14.1
@ When "BASS ENHANCER (2 CHANNEL)" is
selected:
(~aC~~~~
ound is p from the subwoofer.
Sound is produced from the subwoofer.
In this case, set the subwoofer to "YES" at the
speaker settings.
Remote control unit
Remote control unit
.
\
'A
\\
Wemote control unit
Remote control unit
'\ i '.,
'L.,
\
Remote control unit
Remote control unit