Denon DVD-9000 Operating Lnstructions page 14

Dvd audio-video player

Hide thumbs Also See for DVD-9000:

Analog 5.1-channel

audio signals can be output from the DVD-9000.

The multichannel

audio signals recorded

in packed PCM can be played when an AV amplifier

equipped

with analog 5.1-channel

audio

inputs is connected.

To power outlet

Front speaker (right)

e For multi-channel

connections,

set "AUDIO CHANNEL"

under "AUDIO SETUP" at "SETUP"

to "MULTI CHANNEL"

and make the

"SPEAKER CONFIGURATION",

"CHANNEL LEVEL" and "DELAY TIME" settings.

0 Set "LPCM (44.1 kHz/48 kHz)" under "AUDIO SETUP" at "SETUP" to "OFF". (See page 32.)

(If set to "ON", analog audio signals converted to 48 kHz will be output for linear PCM or packed PCM sources.)

0 When playing DVDs that are not copyright-protected

and the unit is set to output digital and analog audio signals simultaneously, for some

discs only the signals below 96 kHz for the front two channels will be output for the analog part.

When playing DVDs that are not copyright-protected,

set "DIGITAL OUTPUT" at "PURE DIRECT MODE" to "OFF". (See page 54.)

e With the DVD-9000, we recommend turning the digital output off and only outputting analog signals in order to keep interference from

the digital output circuitry to the minimum and allow you to enjoy high bit, high sampling frequency, high quality multi-channel sound.