Denon DVD-9000 Operating Lnstructions page 30

@When "MULTI CHANNEL" is selected, use
of the different
Use this to adjust the output level of the
t the distance from the different
speakers to the listening position.
SPEAKER SETUP mode
cursor button to select "AUDIO
SETUP" then press ENTER button.
Q When "SPEAKER CONFIGURATION" is
selected, use the
and cursor buttons to
select the speaker to be set then press the
ENTER button.
*The type of speaker used for the front
speakers, center speaker, subwoofe
surround speakers can be set. Use the
cursor buttons to select the speaker type,
ss the ENTER button.
this when a large speaker is
Select this when a small speaker is
connected.
ct this when no speaker is connected.
ct this when a subwoofer is connected.
Select this when no subwoofer is
connected
* Press the RETURN button to return to the
"SPEAKER SETUP" menu.
Q When "CHANNEF LEVEL" is selected, use
cursor buttons to s ct t
and
cursor buttons to select
off, 2 seconds, 5 seconds or 10 seconds for
the test tone, then output the test tone using
the procedure described below.
*The volume level output from the front
speakers (left and right channels), center
speaker, surround speakers (left and right
channels) and subwoofer can be adjusted.
*The volume level can be adjusted between 0
and -10 dB in steps of 1 dB.
Remote control unit
Remote control unit
*\
Remote control unit
Remote control unit
Remote control unit
Remote control unit