Denon DVD-9000 Operating Lnstructions page 18

* This is a terminal for future system expansion.
I
* Connect using an optical fiber cable (available in stores).
@ Digital data is output from this connector.
available 75 @'ohms pin-plug cord.
e Digital data is output from this connector.
I
e Connect the OPTICAL digital output connector of a CD
player, DAT deck, MD recorder, etc., to this connector to
monitor the sound of that component.
e Connect the COAXIAL digital output connector of a CD
player, DAT deck, MD recorder, etc., to this connector to
monitor the sound of that component.
e This is for connection of a separately sold AV amplifier
equipped with a Denon Link connector.
* Use it to achieve high quality digital sound with low data
loss.
e This is the input connector for wired remote control.
Consult your DENON dealer if you wish to use this
connector.
e This is the output connector
for wired remote control.
Consult your DENON dealer if you wish to use this
connector.
a Connect using video cords (available in stores).
eet c
stores).
g an S-Video connection cord (available in
= Connect using the included video cord.
Lights during playback of multiple angles disc
Lights to indicate the currently playing disc
Lights when the audio signals can be down-mixed.
Lights to indicate the currently playing audio channel.
I These light to indicate the narnes of the sections of the disc being played.
Lights when in the virtual surround mode
I I
Lights to indicate the currently playing audio format.
I
I
These light to indicate the time display mode.
I
I
Displays the title, track number and elapsed time during
I I
playback. I
Lights in the still/pause mode.
Lights when progressive video signals are
being output.
Lights in the programmed play mode.
Lights in the repeat play mode
Lights during playback, flashes when the resume play memory function is activated
_ Lights to indicate the
currently playing video
type.
F: Film source
V: Video source
G: Graphic source
-
Lights in the random play mode