Denon DVD-9000 Operating Lnstructions page 15

Dvd audio-video player

Hide thumbs Also See for DVD-9000:

* Set the "AUDIO

SETUP" default setting as shown below. (See page 32.1

c "DIGITAL

OUT" + "PCM"

"LPCM SELECT" -3 "ON"

Playing DVDs with incorrect

settings

may result noise that could damage your ears or the speakers

DUD-9000

Digital audio input connector (COAXIAL)

DVD-9000

Stereo component

* When connecting to a Z-channel audio stereo device, set "AUDIO CHANNEL" under "AUDIO SETUP" at "SETUP" to "2 CHANNEL"

(see page 29). For multi-channel sources, the signals are down-mixed

into two channels (analog).

(Only the front left and right channels are output for sources for which down-mixing

is prohibited.)

* Set "LPCM (44.1 kHz/48 kHz)" under "AUDIO SETUP" at "SETUP" to "OFF". (See page 32.)

(If set to "ON", analog audio signals converted to 48 kHz will be output for linear PCM or packed PCM sources.)

* Set "DIGITAL OUTPUT" at "PURE DIRECT MODE" to "OFF". (See page 54.)

(If set to "ON", analog audio signals converted to 96 kHz/88.'2 kHz will be output when playing sources recorded at 196

kM2/176.4

kHz.1