Denon DVD-9000 Operating Lnstructions page 17

See page 3.
0 Press once to turn the power on.
e Press again to set to the "OFF" position and turn the
power off.
0 Set the power to the standby mode by pressing the
POWER OFF button on the remote control unit while the
power is on.
* Turn the power on from the standby mode by pressing the
POWER ON button on the remote control unit.
ts when the power is on and when the
power is in the standby mode.
tar
@ This indicator lights when the audio signals of a DVD, etc.,
are being processed digitally with the AL24 processing
Pius, a newly developed analog waveform reproduction
in tar
0 This indicator lights when playing discs recorded in DVD
audio format.
isc tra
@ Load discs here. (See page 41.)
@ Press the OPEN/CLOSE button
to open and close the
disc tray.
* The disc tray is also closed when the FLAY button
is
tton to play the disc. (See page 42.)
* Press this to stop the disc. (See page 43.)
to move back to the beginning of the current
track (or chapter).
83 Press again to move back to the beginning of the previous
track (or chapter). (See page 44.)
@ Press this to move ahead to the beginning of the next
track (or chapter). (See page 44.)
es with specific movie signal and
digital audio signal output settings.
r
@ Use this to select the program source for output.
DVD
: The signals of the disc being played on the
DVD-9000 are output.
OPTICAL :The program source connected to the
OPTICAL digital input connector is output.
COAXIAL :The program source connected to the
COAXIAL digital input connector is output.
* The program source selected with this selector is also
output to the digital output connector.
r
ormation on the disc that is currently playing is shown
on the display. (See page 'IS.1
* Press this button to open and close the disc tray.
(See page 41 .I