Denon DVD-9000 Operating Lnstructions page 28

LACK LEVEL" is selected:
Reduces the standard level of the video output
the image on the TV is far too bright.
(Factory default)
e video output signal's black level to the
standard level.
Remote control unit
Remote control unit
@ When "SQUEEZE MODE" is selected:
"SQUEEZE MODE" -only effective for
progressive output.
(Factory deficit)
this to display 4:3 video signals over the
re screen of a 16:9 TV.
et this to display 4:3 video signals in the center
of the screen on a 16:9 TV.
Remore control unit
SIVE IWODE" is selected:
Remote control unit
This is a mode for high precision detection of the
source type from the level of the video signals
recorded on the DVD.
For DVDs on which the flag (identification signal)
data is recorded incorrectly, the picture quality
may decrease when flag detection is conducted.
This mode is effective in such cases.
DE 2 (flag d@tect~~~ ~Qde~
is a mode for detecting the source type
Remote control unit
from the source flag (identification signal)
recorded on the DVD.
In dark scenes, distinguishing between video
signals and noise signals with level detection is
difficult and the picture quality may decrease.
This mode is effective in such cases.
Remote
control unit
to select "EXIT SETUP", then press the ENTER button. It is also possible to quit
by
pressing the SETUP
button on the remote control unit.