Denon DVD-9000 Operating Lnstructions page 27

@ When "TV TYPE" is selected:
ect this when your TV's video format is NTSC.
If NTSC is selected, output format is fixed to
c.
ct this when your TV's video format is PAL.
If PAL is selected, output format is fixed to PAL.
Select this when your TV is compatible with both
the NTSC and PAL formats.
NTSC signals are output from the video output
jacks when discs recorded in NTSC format are
played, and PAL signals are output from the
video output jacks when discs recorded in PAL
format are played.
@ When "VIDEO OUT" is selected: (NOTES)
Select this when using the DVD-9000 connected
Select this when using the DVD-9000 connected
to an interlace type TV.
* For the component output only, it is possible to
switch between interlace image output and
progressive image output. It is not possible to
specify progressive image output for the Video
output connectors or S-Video output connector.
* When the progressive mode is selected, ,rhe
interlaced sound and picture may be slightly out of
sync. To use the interlaced output, set the setting
to "INTERLACED".
@ When "VIDEO MODE" is selected:
This mode is best suited for playing discs
ining video material.
mode is best suited for playing discs
containing film material or video material
ed with the progressive scan method.
The set identifies the type of material on the disc
being played (film or video) and selects the mode
automatically. This mode is suited for playing
discs containing both film and video material.
o If stripes of noise appear on the picture or the
picture is unclear when playing a specific RVD
video disc, try changing the video mode.
Remote control unit
Remote control
unit
Remote control unit
Remote control unit
Remote control unit
Remote control unit