Removing The Air Filter; Installing The Air Filter; Cleaning The Air Filter And Air Filter Box - Husqvarna FE 450 2016 Owner's Manual

Hide thumbs Also See for FE 450 2016:
Table of Contents

Advertisement

12
SERVICE WORK ON THE CHASSIS
12.22

Removing the air filter

Note
Engine failure Unfiltered intake air has a negative effect on the service life of the engine.
Never operate the vehicle without an air filter as dust and dirt will enter the engine and lead to increased wear.
Warning
Environmental hazard Hazardous substances cause environmental damage.
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
12.23

Installing the air filter

12.24

Cleaning the air filter and air filter box

Warning
Environmental hazard Hazardous substances cause environmental damage.
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
Do not clean the air filter with fuel or petroleum since these substances attack the foam.
Preparatory work
Remove the air filter box lid. (
Main work
Push air filter holder
end
. Swing the air filter holder to one side and remove the air filter with the air
filter support.
Remove the air filter from the air filter support.
H00184-10
Main work
Mount the clean air filter on the air filter support.
Grease the air filter in area
Long-life grease (
L00943-10
Insert both parts together, position them, and fasten them using air filter
holder
The arrow of marking UP faces up.
Info
If the air filter is not correctly mounted, dust and dirt can enter the engine
and cause damage.
H00184-11
Finishing work
Install the air filter box lid. (
Preparatory work
Remove the air filter box lid. (
Remove the air filter.
p. 50)
toward the air filter at position
.
p. 114)
in area
.
p. 50)
p. 50)
(
p. 51)
51
and detach it at

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fe 501 2016

Table of Contents