Sealing The Air Filter Box; Removing The Manifold - Husqvarna FE 450 2016 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.25

Sealing the air filter box

12.26

Removing the manifold

Main work
–
Wash the air filter thoroughly in special cleaning liquid and allow it to dry properly.
Air filter cleaning agent (
Info
Only press the air filter to dry it, never wring it out.
–
Oil the dry air filter with a high quality filter oil.
Oil for foam air filter (
M00303-01
–
Clean the air filter box.
–
Check the intake flange for damage and looseness.
Finishing work
–
Install the air filter.
–
Install the air filter box lid. (
Preparatory work
–
Remove the air filter box lid. (
Main work
–
Seal the air filter box in the marked area
401559-01
Finishing work
–
Install the air filter box lid. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the seat. (
–
Remove the right side cover. (
–
Remove the main silencer. (
–
Remove the fuel tank.
Main work
–
Remove fitting
–
Remove screw
H00185-10
–
Press angle lever
–
Press linkage lever
H00223-10
p. 114)
p. 114)
( p. 51)
p. 50)
p. 50)

p. 50)
p. 49)
p. 58)
p. 55)
( p. 59)

.

.

toward the rear.

downward.
.
p. 42)
52