Table of Contents
Advertisement
10
SERVICE SCHEDULE
10.1
Service schedule
Read out the fault memory using the Husqvarna Motorcycles diagnostics tool.
Check that the electrical equipment is functioning properly.
Check and charge the battery.
Check the front brake linings. (
Check the rear brake linings. (
Check the brake discs. (
Check the brake lines for damage and leakage.
Check the rear brake fluid level. (
Check the free travel of the foot brake lever. (
Check the frame and swingarm.
Check the swingarm bearing.
Check the heim joints at the top of the shock absorber.
Check the shock absorber linkage.
Check the tire condition. (
Check the tire air pressure. (
Check the wheel bearing for play.
Check the wheel hubs.
Check the rim run-out.
Check the spoke tension. (
Check the chain, rear sprocket, engine sprocket and chain guide. (
Check the chain tension. (
Grease all moving parts (e.g., side stand, hand lever, chain, ...) and check for smooth operation.
Check/rectify the fluid level of the hydraulic clutch. (
Check the front brake fluid level. (
Check the free travel of the hand brake lever. (
Check the steering head bearing play. (
Check the valve clearance.
Check the clutch.
Change the engine oil and oil filter and clean the oil screens.
Check all hoses (e. g., fuel, cooling, bleeding, drainage) and sleeves for cracking, leaks, and incorrect routing.
Check the antifreeze and coolant level. (
Check the cables for damage and routing without sharp bends.
Check that the cables are undamaged, routed without sharp bends and set correctly.
Clean the air filter and air filter box.
Change the glass fiber yarn filling of the main silencer.
Check the screws and nuts for tightness.
Check the headlight setting. (
Change fuel screen.
(
Check the fuel pressure.
Adjust the idle speed.
(
Check that the radiator fan is functioning properly.
Final check: Check the vehicle for roadworthiness and take a test ride.
Read out the fault memory after the test ride using the Husqvarna Motorcycles diagnostics tool.
Make the service entry in the Husqvarna Motorcycles Dealer.net and in the Service and Warranty Booklet.
○
One-time interval
p. 70)
p. 75)
p. 69)
p. 73)
p. 72)
p. 79)
p. 80)
p. 80)
p. 62)
p. 69)
p. 68)
p. 47)
p. 90)
p. 88)
p. 96)
p. 94)
p. 63)
p. 66)
(
p. 97)
(
p. 57)
Every 30 operating hours/after every race
Every 15 operating hours
Once after 1 operating hour
33
○
●
●
○
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
○
●
●
○
●
●
●
●
●
●
○
●
●
○
●
●
●
●
○
●
●
●
●
●
●
●
●
●
●
○
●
●
○
●
●
○
●
●
○
●
●
○
●
●
●
●
○
●
●
●
●
●
○
●
●
○
●
●
○
●
●
●
●
○
●
●
○
●
●
○
●
●
○
●
●
○
●
●
- Quick Links:
- Changing the Engine Oil and Oil...
Hide quick links:
Advertisement
Table of Contents
