Panasonic KX-NS1000 Feature Manual page 164

8.1.1 GROUP FEATURES
Connection between devices in different P2P groups
P2P Group 1
PBX
DSP
The PBX group assignment is used when an IP telephone establishes a call with a non-IP telephone (e.g.,
an SLT). If the non-IP telephone's PBX and the IP telephone are in the same P2P group, a P2P connection
is established between the IP telephone and the PBX:
Site 1
P2P Group 1
SLT
→
11.10 PBX Configuration—[3-10] Group—P2P Group
PC Programming Manual References
Section 11 PBX Configuration—[3] Group
2.1.4 Easy Setup Wizard
Feature Manual References
7.1.5 Floating Extension
23.1 Capacity of System Resources
164 Feature Manual
P2P Group 2
non-P2P
PBX
DSP
Router
PBX
DSP
Router
Site 2
PBX
Document Version 2016-03