Unified Messaging-Transfer Recall To A Mailbox; Unified Messaging-Transfer To Mailbox - Panasonic KX-NS1000 Feature Manual

20.1.88 Unified Messaging—Transfer to Mailbox
→ Auto Login DDI/DID
→ Auto Login TRG No.
→ Auto Login DDI/DID, TRG No. Password Entry Requirement
→ Auto Login Toll Saver
23.1 UM Configuration—[4-1] Service Settings—Caller ID / PIN Call Routing—23.2 UM Configuration—[4-2]
Service Settings—Parameters
→ Delayed Answer Time for New Message (5-60 s)
→ Delayed Answer Time for No New Message (5-60 s)
Feature Manual References
20.1.8 Unified Messaging—Automatic Login
Operating Manual References
Subscriber Operation
1.6.6 Other Features—
20.1.87 Unified Messaging—Transfer Recall to a Mailbox
Description
If a call is transferred to an extension via the Automated Attendant (AA) service and the call is not answered
within a preprogrammed Transfer Recall time, the call is redirected to the mailbox of the transfer destination
extension. Therefore the caller can leave a message in the mailbox of the extension without knowing the
mailbox number. The "Transfer Recall to Mailbox" setting must be enabled through system
programming to use this feature.
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—
Recall
11.7.1 PBX Configuration—[3-7-1] Group—UM Group—System Settings—
Feature Manual References
20.1.6 Unified Messaging—Automated Attendant (AA)
20.1.88 Unified Messaging—Transfer to Mailbox
Description
Forwards the call to a specified mailbox.
Calls reach the Transfer to Mailbox Service when the Incoming Call Service of a trunk group or port is set to
"Transfer to Mailbox".
PC Programming Manual References
22.1 UM Configuration—[3-1] UM Extension / Trunk Service—Service Group—
Break Mode - Incoming Call Service
434 Feature Manual
Assigning Your Telephone Numbers for Remote Automatic Log-in and Toll Saver
Recall—Transfer
Transfer Recall to Mailbox
Day, Night, Lunch, and
Document Version 2016-03