Panasonic KX-NS1000 Feature Manual page 244

14.1.4 One-look Network
LPR Time
PT idle time display
PT Time format (12H/24H)
PS idle time display
PS note alarm
Activation key expiration
Error log
SNMP, syslog
File time stamp
CTI applications (first and third party)
Time sent to UM
UM time reading
® 14.6 PBX Configuration—[6-6] Feature—Tenant—
*1
Conditions
[General]
•
KX-NSN001 (Activation Key for One-look Network) is required for each PBX in the network to use this
feature.
•
The types of PBXs that can be assigned as Master and Slave units are as follows:
–
Master unit: KX-NS1000
–
Slave unit: KX-NS1000, KX-NS700
•
A maximum of 15 Slave units can be registered to the Master unit.
•
Tenants (® 19.1.2 Tenant Service) and ICD groups (® 10.1.1 ICD GROUP FEATURES) can contain
extensions from multiple sites, and therefore multiple time zones. For time-sensitive operations, such as
Time Service (® 19.1.3 Time Service), system programming determines which PBX's clock is used for
determining the current time.
® 14.6 PBX Configuration—[6-6] Feature—Tenant—
•
Due to hardware constraints, the following resources are not shared between sites:
–
Echo canceller
–
OGM
–
BGM
–
VoIP resources
–
PS handover
–
Network time synchronization signal
•
The Master unit must be running for the One-look network to operate.
•
It is recommended that One-look networks be located in one country/area. Operation cannot be guaranteed
for One-look networks that span multiple countries/areas.
•
For information about which types of PBXs are available to use as Slave units in your country/area, consult
your dealer.
244 Feature Manual
Feature
Time Service Mode
Time Source
Local PBX
Local PBX
Master Unit
Local PBX
Local PBX
Master Unit
Local PBX
Local PBX
Local PBX
Uses computer's time
Local PBX
Uses UM's time
Time Service Mode
Document Version 2016-03