Local Alarm Information - Panasonic KX-NS1000 Feature Manual

12.1.4 Local Alarm Information

Method
Prime Line
Conditions
•
Line Preference Override
A user can override the preset Line Preference temporarily by pressing the desired Line Access button or
a Memory Dialing button, such as One-touch Dialing, before going off-hook.
•
To select Idle Line Preference, the trunk groups available to the extension should be programmed on a
COS basis. Also trunk groups available for Idle Line Access should be assigned.
PC Programming Manual References
10.7.2 PBX Configuration—[2-7-2] System—Class of Service—External Call Block
11.1.2 PBX Configuration—[3-1-2] Group—Trunk Group—Local Access Priority
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 4—
Preferred Line
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 4—
Preferred Line
Operating Manual References
3.1.2 Personal Programming
12.1.4 Local Alarm Information
Description
When the PBX detects an error, the System Alarm button on the proprietary telephone (PT) of an extension
which is allowed to use this feature through system programming (a maximum of two extensions per PBX),
lights red. Pressing the button will show the error number on the display. If multiple errors occur, the error
number will be displayed in order of highest priority to lowest. The System Alarm button light turns off
automatically after all error numbers have been displayed.
For details about the errors and their solutions, refer to the Installation Manual.
[Error Example]
ERR #100 (01 10000)
(1) (2)
226 Feature Manual
When an extension user goes off-hook, the preset line is selected
automatically. A prime line can be selected from the Line Access
buttons: S-CO, G-CO, L-CO, ICD Group.
Description
Document Version 2016-03
Outgoing
Outgoing