Panasonic KX-NS1000 Feature Manual page 184

10.1.4 ICD Group Features—Outside Destinations
Conditions
•
KX-NSE101, KX-NSE105, KX-NSE110 or KX-NSE120 (Activation Key for Mobile Extension) is required
to use this feature. One activation key is required for each extension (virtual PS) that will use this feature.
•
For this feature to be activated, the following conditions must be met:
–
A virtual PS is assigned as a member of the ICD Group. (® 21.1.2 Virtual PS)
–
The Mobile Extension setting for the virtual PS extension must be set to Enable.
–
The forwarding type of the virtual PS is set to All Calls. (® 7.1.6 FWD (Call Forwarding))
–
The forwarding destination is an outside party, including an extension at another PBX in the network.
–
FWD to CO line is allowed through COS programming for the virtual PSs.
•
Up to 4 virtual PSs can be assigned to a single ICD Group. If more than 4 are assigned, the 4 virtual PSs
with the lowest member numbers are available.
•
ELCOT/LCOT CO lines and channels of a T1 CO line set to LCOT do not support this feature.
•
Calls to an ICD Group will ring at a virtual PS even if all of the other extensions assigned to the group are
busy.
•
If all members of an ICD Group are virtual PSs, and CO lines are available but the called parties are all
busy, neither the queuing or overflow features will operate. Therefore, it is recommended that at least one
PT or SLT is also assigned to an ICD Group.
•
To log in to or out of a group, a virtual PS user can access the PBX through DISA, enter the Walking COS
feature number (if required), and access log-in/log-out settings.
•
Delayed ringing can be assigned for virtual PSs in the same way as for other extensions.
•
The wrap-up time feature and Automatic Log-out feature are not available for virtual PSs.
•
When forwarding calls to a public CO line, system programming selects whether the CLIP number of the
calling party or of the virtual PS is sent to the forward destination.
When calling using a private network, the CLIP number of the calling party will always be sent.
•
DSS button for Cellular Phone XDP Parallel
The DSS button light of the extension registered first in an ICD Group will turn red if the parallel cellular
phone:
–
is on a CO line call that was received via the ICD Group.
–
is on a CO line call that was made using the Walking COS Through DISA feature. (® 5.1.10 DISA
(Direct Inward System Access))
PC Programming Manual References
9.30 PBX Configuration—[1-2] Configuration—Portable Station—PS Registration and De-registration
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—CO & SMDR—
to CO
10.9 PBX Configuration—[2-9] System—System Options—Option 4
→ Send CLIP of CO Caller—when call is forwarded to CO
→ Send CLIP of Extension Caller—when call is forwarded to CO
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Main
→ Floating Extension Number
→ Distribution Method
11.5.1.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Member
List
→ Extension Number
→ Delayed Ring
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 9—
Extension
12.2.2 PBX Configuration—[4-2-2] Extension—Portable Station—FWD/DND
184 Feature Manual
Call Forward
Mobile
Document Version 2016-03