Enabling The Periodic Online User Re-Authentication Function; Displaying And Maintaining 802.1X - HP MSR2000 Configuration Manual

To configure the quiet timer:
Step
1. Enter system view.
2. Enable the quiet timer.
3. (Optional.) Set the quiet timer.
Enabling the periodic online user re-authentication
function
Periodic online user re-authentication tracks the connection status of online users, and updates the
authorization attributes assigned by the server. The re-authentication interval is user configurable.
The periodic online user re-authentication timer can also be set by the authentication server in the
session-timeout attribute. The server-assigned timer overrides the timer setting on the access device, and
enables periodic online user re-authentication, even if the function is not configured. Support for the
server assignment of re-authentication timer and the re-authentication timer configuration on the server
vary with servers.
To enable the periodic online user re-authentication function:
Step
1. Enter system view.
2. (Optional.) Set the periodic
re-authentication timer.
3. Enter Layer 2 Ethernet
interface view.
4. Enable periodic online user
re-authentication.

Displaying and maintaining 802.1X

Execute the display commands in any view and the reset commands in user view.
Task
Display 802.1X session information, statistics,
or configuration information of specified or all
ports.
Clear 802.1X statistics.
Command
system-view
dot1x quiet-period
dot1x timer quiet-period
quiet-period-value
Command
system-view
dot1x timer reauth-period
reauth-period-value
interface interface-type
interface-number
dot1x re-authenticate
Command
display dot1x [ sessions | statistics ] [ interface interface-type
interface-number ]
reset dot1x statistics [ interface interface-type
interface-number ]
65
Remarks
N/A
By default, the timer is disabled.
The default is 60 seconds.
Remarks
N/A
The default is 3600 seconds.
N/A
By default, the function is disabled.