Failed To Set The Storage Path - HP MSR2000 Configuration Manual

2. Use mkdir to create the required path.
3. Specify a correct export path.
4. Configure the proper key pair in the PKI domain.
5. Clear up the disk space of the device.

Failed to set the storage path

Symptom
The storage path for certificates or CRLs cannot be set.
Analysis
The specified storage path does not exist.
•
The specified storage path is illegal.
•
The disk space is full.
•
Solution
1. Use mkdir to create the path.
2. Specify the correct storage path for certificates or CRLs.
3. Clear up the disk space of the device.
135