HP MSR2000 Configuration Manual page 323

Figure 88 Network diagram
Configuration prerequisites
Configure IP addresses for the host, router, and servers as shown in
•
can reach each other.
Configure the RADIUS server correctly to provide authentication/authorization functions.
•
Configuring the portal authentication server
This example assumes that the portal server runs on IMC PLAT 5.1 SP1 (E0202P05) and IMC UAM 5.1
(E0301).
1. Configure the portal authentication server:
a. Log in to IMC and click the Service tab.
b. Select User Access Manager > Portal Service > Server from the navigation tree to enter the
portal server configuration page, as shown in
c. Configure the portal server parameters as needed.
This example uses the default settings.
d. Click OK.
Figure 89 Portal server configuration
2. Configure the IP address group:
Figure 89.
312
Figure 88 and make sure they