Configuring Hwtacacs Schemes - HP MSR2000 Configuration Manual

Step
3. Specify a security policy
server.
Displaying and maintaining RADIUS
Execute display commands in any view and reset commands in user view.
Task
Display the RADIUS scheme
configuration.
Display RADIUS packet statistics.
Clear RADIUS statistics.

Configuring HWTACACS schemes

Configuration task list
Tasks at a glance
(Required.)
(Required.)
(Optional.)
(Optional.)
(Required.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
(Optional.)
Creating an HWTACACS scheme
Create an HWTACACS scheme before performing any other HWTACACS configurations. You can
configure up to 16 HWTACACS schemes. An HWTACACS scheme can be referenced by multiple ISP
domains.
To create an HWTACACS scheme:
Step
1. Enter system view.
2. Create an HWTACACS
scheme and enter its view.
Command
security-policy-server { ipv4-address
| ipv6 ipv6-address } [ vpn-instance
vpn-instance-name ]
Creating an HWTACACS scheme
Specifying the HWTACACS authentication servers
Specifying the HWTACACS authorization servers
Specifying the HWTACACS accounting servers
Specifying the shared keys for secure HWTACACS communication
Specifying a VPN for the scheme
Setting the username format and traffic statistics units
Specifying the source IP address for outgoing HWTACACS packets
Setting HWTACACS timers
Displaying and maintaining HWTACACS
Command
display radius scheme [ radius-scheme-name ]
display radius statistics
reset radius statistics
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
29
Remarks
By default, no security policy server
is specified for a scheme.
You can specify up to eight security
policy servers for a RADIUS scheme.
Remarks
N/A
By default, no HWTACACS
scheme is defined.