Table of Contents
Advertisement
3 Software
Message
type
Error
To solve an error:
(1) Check that the correct target disk was selected.
(2) Check that the target disk has sufficient storage capacity to store the rescue disk utility and a full
system backup
(3) If the storage device is removable, check that it is inserted properly and is of the correct type.
(4) Check whether the storage device is write protected. SD Memory Cards often have a small me-
chanical write protection switch on them.
(5) Check that the user has the necessary access rights for the target disk.
(6) Check that the Rescue Disk Creator is running "As Administrator".
(7) Check that no other applications are using the target disk.
(8) Retry the operation with the same target disk.
(9) Retry the operation with a different target disk.
(10) Restart the IPC and then retry the operation.
(11) If the issue persists, contact your OMRON representative.
3 - 12
Message
Creation progress: Failed to copy image to
rescue disk.
Reason:
•
Unable to revoke access to the disk
•
Unable to revoke access to the drive
•
Disk write failed
•
Unable to dismount the drive
•
Invalid drive
•
Unable to obtain exclusive access to the
drive
•
The disk could not be accessed
•
The drive could not be accessed
•
Unable to revoke exclusive access to the
drive
Description
The mentioned reason prevented copying the
image to the connected storage device.
Ensure the connected storage device:
•
Is not used by other programs
•
Is not write protected or read-only
NY-series Industrial Box PC User's Manual (W553)
Advertisement
Table of Contents
