Table of Contents
Advertisement
3
Connect the I/O connector.
Hold the black part
Do not tilt the orange levers
4
Connect the DVI connector to an external monitor such as the Industrial Monitor and tighten
the fastening screws.
For an Industrial Panel PC this is optional because a monitor is integrated.
5
Connect a device to the optional interface (DVI or RS-232C) if applicable and tighten the fas-
tening screws.
6
Connect the USB ports to peripheral devices .
7
Connect the Box PC to the required Ethernet interface connector(s).
Refer to 4-2-4 Ethernet Connector Specifications on page 4 - 19 for Ethernet port details.
The Box PC is connected.
NY-series Industrial Box PC User's Manual (W553)
A
when inserting the connector, this enables the auto-locking mechanism.
A
B
B
because this will unlock the connector.
5 Installation
5
5 - 43
Advertisement
Table of Contents
