Table of Contents
Advertisement
3
Figure 6
MSAM Card
You may need to install one or two or three Multiple Security Access Module
(MSAM) cards or replace an old one.
Observe standard precautions in handling electrostatically sensitive devices.
CAUTION
Electrostatic discharge can damage the equipment. Verifone recommends using
a grounded anti-static wrist strap.
To install or replace MSAM cards:
Installing or
Replacing MSAM
1
Card
2
3
4
5
Close the cable compartment, insert and tighten the screw as shown below.
Closing Cable Compartment with Back Cover
Power off the device.
Place the device face down on a soft and clean surface.
Remove the back cover of the unit.
Insert the MSAM cards. Carefully slide the cards one at a time into the slots
until fully inserted. The correct orientation of the MSAM card is as indicated in
the
Figure
7.
Close the back cover.
S
MSAM Card
M425 I
G
NSTALLATION
UIDE
ETUP
22
Advertisement
Table of Contents
