Hemiplegic Armrest; Abduction Cushion; Trunk Support; Trunk Support With Fixed Arm - Invacare rea azalea assist User Manual

5.7 Hemiplegic armrest

B
A
1. Loosen the screw A.
2. Remove the original armrest B.
3. Mount the hemiplegic armrest C in the armrest pole.
4. Re-tighten the screw A.
5. The hemiplegic armrest can be adjusted in angle. The
resistance can be increased/decreased by adjusting the
screw A.
WARNING!
Risk of damage
Damage on the armrest
– Do not put pressure on the front of the
armrest, as this could cause damage on the
armrest attachment.

5.8 Abduction cushion

1. The height adjustment and removal is operated by the
handwheel A.
2. The depth is adjusted in a forward or backward position.
Loosen handwheel A and turn.
1488727-M
C
A
A

5.9 Trunk support

5.9.1 Trunk support with fixed arm

The trunk supports can be adjusted in height, depth and
sideways.
WARNING!
Risk of trapping
– Be careful not to trap your arm between trunk
support and armrest when changing the angle
of the backrest.
A
Backrest plate
Tools: 5 mm Allen key
Height adjustment
1. You adjust the height by first loosening the screw /
screws A.
2. Move the attachment B upwards or downwards.
3. Re-tighten the screw / screws.
Sideways adjustment
1. Adjust the trunk supports sideways by loosening the
knob C.
2. Move the support sideways to the required position.
3. Re-tighten the knob C.
Depth adjustment — fixed cushion
A
Tools: 5 mm Allen key
1. To adjust the depth of the trunk supports, loosen the
screws D with an Allen key.
2. Move the trunk support forwards or backwards.
3. Re-tighten the screws.
4. Remove the trunk support by loosening knob C and
pull the trunk support sideways and outwards.
C
A
B
B
Adjustable backrest
Accessories
C
27