Removing The Transfer Roller Unit - Mita DP-2800 Service Manual

Removing the transfer roller unit

Before removing the transfer roller unit, remove the paper feed unit out of the printer. Then,
the transfer roller comes out without needing a tool.
Caution: Do not touch the transfer roller (sponge) surface. Oil and dust (particles of paper,
etc.) on the transfer roller can significantly deteriorate the print quality (white
spots, etc.).
The transfer roller unit 1 is held in place by two joints at both ends. To remove the transfer
roller unit: Hold the tab at both left and left sides of the transfer roller unit first. When
removing, tilt the transfer roller unit upward so that the joints are aligned to free the transfer
roller unit.
1
5A2
5-7