Environmental Requirements; Environmental Conditions - Mita DP-2800 Service Manual

5A2

Environmental requirements

Environmental conditions

The Environmental requirements section on page Chapter 1-2 should be observed to
ensure the optimum operation of the printer. The use of the printer in a location which does
not satisfy the requirements may result in troubles and risk shortening its service life.
The printer will work best if it is installed in a location that is:
• Level and well supported (Place the printer on a sturdy table or desk.)
• Not exposed to sunlight or other bright light (not next to an uncurtained window). Do not
place the printer on an unstable cart, stand, or table.
• Near an AC wall outlet, preferably one that can be used for the printer alone. The outlet
should have a ground slot, or an adapter should be used. If you use an extension cord,
the total length of the power cord plus extension cord should be 17 feet or 5 meters or less.
• Well ventilated, not too hot or cold, and not too damp or dry (See section Environmental
requirements on page Chapter 1-2). If you install the printer where the temperature or
humidity is outside the requirements in section Environmental requirements in chapter 1,
the best print quality may not be expected and there will be an increased chance of paper
jams.
• Provide a sufficient clearances around the printer to ensure ventilation and ease of
access.
1-8