Mita DP-2800 Service Manual page 130

5A2
Error Applicable
code card type
06 SRAM
07 SRAM
08 SRAM
09 SRAM
—
10
11 SRAM
—
12
13 Flush
14 —
15 Flash
16 —
17 Flush
18 Flush
19 —
For details on memory card availability, see section Printer specifications in chapter 1.
6-12
Memory card protect error. Release the write protection on the
memory card when you write data to the memory card.
Non format. Reformat the memory card using MODE SELECT
(See the printer's instruction handbook).
Partition name error. Follow instructions given attempt in Chapter
2 to properly name the destination.
Memory card data full error (An attempt was made to write data
exceeding the capacity of the memory card). Abandon the writing
operation on the host computer first. Press CONTINUE key;
when the message turns to Waiting, press FORM FEED key
(Ready).
Reserved
Data name full (An attempt was made to write more than 127
destination data names). Press CONTINUE key (Ready).
Reserved
Erase logic error with flash memory card. Try replacing the
memory card.
Reserved
Non PCMCIA flush card. Replace the card with a PCMCIA flush
card.
Reserved
Unable to write to the flash memory card due to insufficient printer
memory. Either delete unnecessary macros or fonts stored in the
printer, or extend the printer's available memory.
Writing error. Try replacing the memory card.
Reserved
Meaning