Correcting Paper Jams - Mita DP-2800 Service Manual

Correcting paper jams

Warning: Pull out the paper feed unit (See below.) and wait a while to allow the fuser unit
to cool. Do not touch the fuser unit as this may result in a burn injury.
Warning: Take care not to leave any small pieces of paper in the printer when removing
paper jams as this may result in fire.
Note: Data remaining in the printer will be lost if power is turned off while correcting a paper
jam.
After checking the location of the paper jam using the table on the previous page, take
corrective action according to the table on the next page. After removing all jammed paper,
the printer will automatically resume printing.
5A2
Fuser unit
6-43